Garden Benches
While it was nice having a veg patch due to its shaded nature, it didn't really produce as much as I had hoped. So I started to think about changing the space into a seating area.
I used the following guide on B&Q's website, a useful resource, and the video below, which I used to reference back to as I went through the project.
Preparing the base
Dig out soil and mark depth of base with stakes
Following the guide above, I removed a fair amount of soil so I had a sufficient foundation depth which I could fill with a sub-base. In the guide, it recommends pegging out this depth. This is a great tip as it allows you to measure out and maintain a flat base to then work with later on when it comes to placing the flags.
Patio with soil removed
Patio sub-base
Patio sub-base raking
Patio sub-base complete
Extending the pond
While waiting for the delivery of the patio slabs, I took the opportunity to look into extending the wildlife pond I had put a few years previously.
Laying the patio slabs
The slabs I ordered were a standard 60x60cm patio slab. I'd recommend you get someone to help you lift these ones are they are quite heavy. After the patio was complete, I put up a small pergola to hang some solar lights and bought some decking board to clad around the pond and seating area.
Pomd Cladding
Before and after - cladding around the pond and patio area
Job Done
Pond & Patio Extension
During this project, I got to transform and upgrade areas of the garden which totally changed the look and feel of the space.