While I’ve been looking for new job roles, I’ve been spending time each week at my parents' house, helping them declutter.
I came across my old Amiga, which, when we got it in 1991, was the best Christmas present my brother and I had ever had.
However, after over 25+ years abandoned in an attic room, it had seen better days
Amiga 500 Plus before restoration
The case of the Amiga after washing with fairy liquid and warm water
Taking the Amiga apart, I immediately noticed the yellowing of the keys on the keyboard. This, after some research, is caused by bromine flame retardant in the old ABS plastic, which breaks down when exposed to ultraviolet (UV) light and oxygen. I also read about a process called ‘Retrobrightening’ which can be done with hydrogen peroxide.
I started with the case of the computer, which initially looked bad, but the mould was superficial and wiped off after a soak (I guess the years on a box saved it a little).
Amiga with casing removed (Yellowing on keys visible)
I'd read some guides online about pulling keycaps off the keyboard. All the keys had to come off so I could do the Retrobrightening process. I bought the following kit from Amazon for the task.
Amiga keycap pulling
These tools were really handy for doing the job.
Word of warning: the following keys have bars attached to them, so should be removed with care.
Tab, Left Shift (my bar was missing), Space bar, Right Shift, Return, 0 Ins (Keypad) & Enter (Keypad)
With the spacebar I used two of the tools to grab the key and pull up from front to back. The the other keys are to be pulled front to back with the exception of the enter keys which from the bar placement, you can see is left to right.
Now that I had all the keys off I noticed I was missing a bar on the left shift key.
Tab key & missing left shift bar (Same size)
Fashioned a replacement from a paperclip
Wasn't ideal but functioned just fine
I then gave the keyboard and an initial wipe down before I moved on to some other jobs
I bought the following products from Amazon in preparation for the cleaning and barrel battery removal.
Retro brightening
Keys were washed in fairy liquid and warm water
I then placed them in a plastic container for the retrobrightening
For the retro whitening, it is recommended to wear safety glasses and protective gloves when handling the hydrogen peroxide. Once I'd added this to the container, I put it outside in a sunny spot for a few hours. As it was end of summer I had to put it out a few times till I could see the change I wanted.
Each key has a spring which apart from the spacebar which has 3. One in the middle that is the same size as the other key springs and two smaller ones. They are extremely easy to lose as I found out myself. I bought some replacement springs which were 0.7mm thick but found these to be too firm. I ended up getting these 0.4mm wire diameter 9mm 10mm length ones, which did the job for the one I was missing.
All the keys back on the board and retrowhitened
Testing using Amiga Test Kit I discovered 4 of the keys weren't working
Under the hood
Having a peek under the hood at the motherboard, I could see an instant problem with the battery.
Reading up on various forums, I found that the leaking Varta barrel battery is a very well-documented issue with the Amiga 500 Plus. The good news is that it's not required for the computer to run programs or play games
Using the Side Wire Cutters, I carefully removed the battery. This was recommended as the battery is only used for keeping the internal system clock and calendar date running when the Amiga 500 Plus is turned off. I cleaned the traces and pins around the chips where the battery had leaked with the Aksoy Distilled White Spirit Vinegar and then cleaned thoroughly with the Isopropanol Alcohol.
Battery Removal Magnified
After cleaning
More keyboard issues
After assembling the Amiga again I ran a test to find the same keys were still being impacted. This time after some research I turned my attention to the keyboard membrane traces.
From this, I was able to identify 3 trace wires which are hard to see here but appear darker than the other ones. These were where the traces were failing to pass the signal from the keys. A continuity check with the multimeter (I had to buy one) confirmed this.
I did have a go at patching this up, but I ended up ordering a replacement membrane (Amiga A619B, short enter key version) from ebay.
The End Result
I learned alot while doing this project. From retrowhitening using chemicals to cleaning up corrosion on a motherboard. Troubleshooting keyboard issues and tracing the source. I also bought a Greaseweazle to enable me to backup my old amiga disks to .adf format. This allows me to run games in the WinUAE emulator, you can also then write a .adf image to disk to run on the Amiga itself.
Other purchases
Amiga USB Mouse Adapter
Logitech M705 Marathon Wireless Mouse (Works when used with the above 9-pin to USB Adapter in Joystick Port 1)
Greaseweazle v4.1
Floppy Disc Drive (To use with the Greaseweazle)
Commodore Amiga (All Models) RGB Scart Cable with Stereo Audio
LiNKFOR SCART to HDMI Converter 1080P RGB CVBS with Optical Audio
Other Useful Links
PlanetEMU (Amiga ROMS)
Amiga Test Kit 1.21 (Used the Greaseweazle to write the zipped image to disk)
FluxMyFluffyFloppy (MS Windows GUI for Greaseweazle Hosted Tools)
Old Boot Screen
X-Copy Professional
Magic Pockets Classic
My Next Article will be on the Greaseweasle what it is and why its an essential bit of kit for retro gaming on the Amiga.
INSPIRED